When the stone engraving machine is used, there are many operating specifications, and the operation of the engraving machine can be made smoother according to these operating specifications. As a large-scale machine, the stone engraving machine should check the equipment before use, which not only enables safer operation, but also reduces unnecessary losses.
First of all, before using this machine, the stone engraving machine manufacturer recommends that you check the interface of the engraving machine, especially the interface connected to the computer. If this place is not connected well, the engraving machine will be out of control when engraving, and the whole sculpture will be over from the beginning, and the stone will be wasted. Therefore, it is recommended that customers check this interface before use, whether it can be used normally or not.
In addition to checking the interface, it is necessary to check the pump. The water pump of the stone engraving machine is very important. Make sure that there is enough water in the pump to keep the machine cool and cool. Also check that the slide of the machine tool is unobstructed and can be used normally. Finally, check the knives and adjust the speed of the knives to ensure that the knives can be used normally when engraving. If the quality of the knives is problematic, replace the new knives in time and adjust the corresponding knives. The speed ensures that the quality of the engraving process is correct.
