The main use of woodworking engraving machine and the difference between control methods

The main purpose of woodworking engraving machine:
Mainly used for wood processing, making it more beautiful. There are many types of woodworking engraving machines, and there are many brands, which leads to uneven prices.
The woodworking engraving machine is divided into three control modes: First, all the calculation work is completed by computer control. When the engraving machine is working, the computer is in working state, and other typesetting work cannot be performed, which may cause waste due to misoperation of the computer;
The second is the use of single-chip control, the engraving machine can work at the same time can be typeset, but can not turn off the computer, can reduce the waste caused by computer misuse;
The third is to use the USB port to transfer data. The system has a memory capacity of more than 32M. After saving the file, you can completely disconnect the computer, turn off the computer or perform other typesetting, which can greatly improve the work efficiency.

How to deal with the phenomenon of knives in woodworking engraving machines

Woodworking engraving machines may encounter various kinds of processes during processing, and the knives are an unexpected situation. Engraving machine knives refer to the sudden insertion of the tool into the workpiece during the movement, resulting in knife damage, scrapping of the workpiece and even impairing the accuracy of the machine. Avoid knives during processing.
When the engraving machine runs the knives, immediately press the emergency stop switch button on the machine to terminate the current machining. Check if the workpiece is scrapped, and then run the spindle for about 2 hours according to the spindle running-in procedure. If the tool is a serious tool, check whether the accuracy of the machine is damaged. If the accuracy is impaired, let the engraving machine manufacturer handle it.
The reason for the occurrence of the knives is generally misoperation, machining program problems and machine tool failures. Therefore, one of the checks for each link in the operation is to avoid misoperation, and to perform path overcut analysis in the path variant to avoid knives. The path appears. At the same time, to ensure the power environment of the CNC engraving machine and the stability of the control computer, these two are important causes of machine tool failure.