The harm of the advertising engraving machine y-axis running jitter?

The y-axis of the advertising engraving machine runs jitter, which affects the processing accuracy and affects the quality of the product. In addition, the damage of the equipment is scrapped and even caused casualties. Therefore, the y-axis running jitter of the advertising engraving machine must be paid attention to and must be solved in time.

Timely solution to the meaning of the y-axis running jitter of the advertising engraving machine?

The above said the harm of the y-axis running jitter of the advertising engraving machine, then we run the jitter on the y-axis of the advertising engraving machine, which can stop the damage, prevent equipment damage and prevent personal injury. This can also improve the life of the advertising engraving machine and make the equipment work better.

What is the y-axis running jitter of the advertising engraving machine?

1. There is a scar on the coupling.

2. The screws on the gantry are loose.

3, the lead screw or rack wears large, due to the speed of the machine tool vibration.

4. The circuit in the distribution box has a virtual connection generated by static electricity.

What should I do if the advertising engraving machine runs on the y-axis?

1. Check if there are any scars on the coupling. If there are any injuries, replace it.

2. Check that the screws on the gantry are loose. The most important thing is to look at the two planes on the side of the Y-axis. If it is loose, tighten it.

3. Check if the lead screw or the rack is worn out. If the wear is large, replace these parts.

4. Check the circuit in the distribution box for static electricity. If it is static, check whether it is grounded or not.

What are the precautions for running the y-axis of the advertising engraving machine?

Check to solve the problem of the y-axis running jitter of the advertising engraving machine. Be sure to turn off the switch in advance, unplug the power supply, and cannot work with power. Remember safe operation