Stone engraving machine overview

    The stone engraving machine market is constantly expanding. At present, the stone engraving machine occupies 30% of the entire engraving machine market. Many engraving machine manufacturers also brand the stone engraving machine. Up to now, there are more than 100 brands in the stone engraving machine market. In order to help customers buy the right machine, this article is for reference only. 2013/11/12
Stone engraving machine definition: (not completely accurate, only for reference)
    It is mainly used for engraving machines for stone carving. The engraving machine is a computer numerical control engraving machine, which is an automatic engraving machine equipped with a control system. At present, the engraving machine is mainly divided into two major categories: laser engraving machine and mechanical engraving machine. The mechanical engraving machine is divided into several categories. Compared with laser engraving machines, mechanical engraving machines can control the engraving depth of engraving products, and are better at embossing. The domestic mechanical engraving machine is relatively mature for the woodworking industry; it is used in the development and market development stage of the stone industry.
The main purpose of stone engraving machine:
    Stone relief (processing a three-dimensional effect on one surface) is a combination of Yang and Yin carving, stone lettering (mainly used in tombstones, stone tablets, cemeteries, etc.), stone line carving, stone shaped hollow relief, stone cutting ( Relatively not very good, depending on the situation)
Stone engraving machine suitable materials:
    Marble series, granite series, jade series, bluestone series, sandstone series. Ordinary common granite is currently profitable within 2CM of the machine, and it is difficult to be more than 2CM. Marble, jade and other current fastest machines are 4cm, 15M speed. At present, my company has no problem in carving marble 8cm at a time.
Stone engraving machine main accessories:
    Engraving machine guide rail: divided into linear guide rail and compass. At present, linear guide rail is most suitable for stone engraving machine. Linear guide rail is also divided into model and brand, which cannot be ignored.
    Engraving machine spindle: The main shaft is mainly divided into constant power spindle and constant torque spindle. Many manufacturers have different definitions of these two spindles. Generally, it is best to follow the spindle model recommended by the manufacturer. Every manufacturer has its own set of assembly processes. Of course, you don't know how to be responsible. If you want to save money, then you can't say it.
    Engraving machine inverter, drive: Some of these accessories are not a problem, only one model size difference.
    Engraving machine body structure: At present, our company chooses the Italian model structure, which is very good to improve the stability of the machine.
    Additional functions of the engraving machine: rotating shaft, bed weighting, assembly process (this factory has big and small differences)

How to make mini words with engraving machine

First, what is the mini word?
The so-called mini word is also called super mini word. It is a new type of illuminating label product which has been developed in recent years. It is made of imported high-molecular materials. It has beautiful appearance and exquisiteness. It is the new favorite of the new era photoelectric logo.



The advantage of the mini word?
Exquisite appearance - made by engraving technology, high precision machine, high interface coincidence, like a craft, fine and beautiful.
Uniform illumination - made of polymer acrylic material, uniform illumination, soft and full, bright and not glare.
Illuminated three-dimensional - obvious before and after the engraving, can be based on the needs of customers to send other colors of light, strong sense of three-dimensional.
Energy-saving and energy-saving - LED lamps have low power consumption, long service life and low heat generation, which is suitable for long-term work.
Strong patience - better resistance to direct sunlight, oxidation, and rain erosion than general acrylic.
Low failure rate - the letter shell is firm, the LED lamp has a theoretical life of 10 years, almost zero failure rate.
What about the application of mini words?
The mini word is widely used in company service desks, store door signs, high-end leisure places, mobile phone stores, property management offices and other places.
How to engrave the mini-word engraving machine?
It consists of a panel, a bottom plate and an LED light. The panel is formed by chamfering a polymer acrylic plate through an engraving machine to form a three-dimensional bevel, which is then engraved and separated. The bottom plate is laser cut by an acrylic plate, and the LED lamp can be installed. Finished with organic glue.

How to engrave the engraving machine mini word?

1. Make computer files, edit and typeset with CDR software, typeset according to the actual 1:1 size, note that the strokes should not be too small, and ensure that they can be placed in the smallest LED module.
2. Select the material used, the imported high-molecular acrylic material used in the mini-lighting word, the advantage is that the cutting is smooth and free of burrs.
Place the required specifications on the engraving machine, then connect the prepared documents to the engraving machine and start working.

3. The engraving of the mini luminous characters is completed in several steps:
(1) The back of the word is slotted;
(2) The front side of the word is inverted;
(3) cutting out the front;
(4) Cut out the bottom plate.
4. After the carving by the professional engraving machine, do a good job of cleaning up, and install the LED high-brightness light source prepared in advance in the slotted area of ​​the word.
5. After the above steps are completed, package these parts, then spray the favorite paint color on the side, and after drying, make it a complete mini-lighting craft.

What are the precautions for engraving machine carving mini words?
1. Leave enough gaps when working on the file, and try to be able to put in the smallest LED module.
2, pay attention to the front and back when carving, can not be mistaken.
3, when spraying paint, the front and back sides should be covered with self-adhesive materials.